Errors
Member AnesthesiaMachine::CalculateEquipmentLeak ()
Error: Invalid Airway Mode Encountered in Compute Equipment Leak function
Member Cardiovascular::CalculateVitalSigns ()

Fatal: Diastolic pressure has fallen below -2

Fatal: Systolic pressure has exceeded 700

Member Cardiovascular::ChronicAnemia ()
if too much hemoglobin is removed, we will no longer meet validation, so set to maximum amount that can be removed.
Member Cardiovascular::ChronicPericardialEffusion ()

Cannot specify volume accumulation greater than 1000 mL. Accumulated volume is now set at 1000 mL.

Cannot specify volume accumulation less than 0 mL. Accumulated volume is now set at 0 mL.

Member Cardiovascular::ChronicRenalStenosis ()

Cannot specify left occlusion fraction less than zero

Cannot specify right occlusion fraction less than zero

Cannot specify left occlusion fraction greater than one

Cannot specify right occlusion fraction greater than one

Member Cardiovascular::CPR ()
Warning: CPR compression ratio must be a positive value between 0 and 1 inclusive.
Member Cardiovascular::Hemorrhage ()

Error: Bleeding rate cannot exceed cardiac output

Error: Bleeding rate cannot be less than zero

Error: Bleeding must be from a vascular compartment

Fatal: Bleeding must come from nodes in the circultatory circuit

Error: Hemorrhage compartments must have nodes in the circulatory circuit

Member Cardiovascular::PericardialEffusion ()

Effusion rate is out of physiologic bounds. Effusion rate is reset to 1.0 milliliters per second.

Cannot specify effusion rate less than zero. Effusion rate is now set to 0.0.

Member Drugs::AdministerSubstanceBolus ()
Error: Unavailable Administration Route
Member Drugs::AdministerSubstanceCompoundInfusion ()
Fatal: rate cannot exceed 285 mL/min
Member Drugs::AdministerSubstanceInfusion ()
Fatal: Titration administration cannot be negative
Member Drugs::CalculatePartitionCoefficients ()
Fatal: Binding Protein not supported
Member Environment::ProcessActions ()

Warning: SurfaceArea and SurfaceAreaFraction are both set. The largest fraction will be used.

Warning: Neither SurfaceArea nor SurfaceAreaFraction are set. A fraction of 1 will be used.

Warning: Thermal application effective area exceeds the total skin surface area. A fraction of 1 will be used.

Warning: SurfaceArea and SurfaceAreaFraction are both set. The largest fraction will be used.

Warning: Neither SurfaceArea nor SurfaceAreaFraction are set. A fraction of 1 will be used.

Warning: Thermal application effective area exceeds the total skin surface area. A fraction of 1 will be used.

Warning: AppliedSurfaceArea and AppliedSurfaceAreaFraction are both set. The largest fraction will be used.

Warning: Neither AppliedSurfaceArea nor AppliedSurfaceAreaFraction are set. A fraction of 1 will be used.

Warning: Thermal application effective area exceeds the total skin surface area. A fraction of 1 will be used.

Member Environment::StateChange ()
Fatal: Total ambient/environment gas volume fractions must sum to 1.0.
Member Gastrointestinal::PreProcess ()
Unable to read consume meal action file
Member Inhaler::Administer ()

: Already processing a Substance Inhalation, ignoring this command.

Fatal: Inhaled substance does not have a density value.

Member Renal::CalculateActiveTransport ()
Fatal: Unrecognized renal clearance type
Member Respiratory::ImpairedAlveolarExchange ()

Fatal: The Impaired Alveolar Exchange action must include either a surface area of fraction.

Error: The Impaired Alveolar Exchange action cannot have both an impaired surface area and impaired fraction defined. Defaulting to the surface area value.

Member Respiratory::Pneumothorax ()

Patient: Cannot perform an intervention if Tension Pneumothorax is not present on that side.

Patient: Cannot perform an intervention if Tension Pneumothorax is not present on that side.

Patient: can't process needle decompression if no pneumothorax is present

Patient: can't process a chest occlusive dressing if no pneumothorax is present

Member SEAnesthesiaMachineActionCollection::ProcessAction (const SEAnesthesiaMachineAction &action)
Unsupported Action
Member SEConditionManager::ProcessCondition (const SECondition &condition)
Unsupported Condition
Member SEEnvironment::ProcessChange (const SEInitialEnvironmentConditions &change)
Unable to read Configuration Action file
Member SEEnvironment::ProcessChange (const SEChangeEnvironmentConditions &action)
Unable to read Configuration Action file
Member SEEnvironmentActionCollection::ProcessAction (const SEEnvironmentAction &action)
Unsupported Action
Member SEInhalerActionCollection::ProcessAction (const SEInhalerAction &action)
Unsupported Action
Member SEPatientActionCollection::ProcessAction (const SEPatientAction &action)

Unknown ChestCompression type

Unsupported Action